LaserCheck Hand-held Laser Meter

LaserCheck Laser Power Meter

Handheld Laser Power Meter (RoHS)

LaserCheck is an inexpensive, hand-held laser power meter that displays measurements on a built in LCD screen.

Hand-held laser power meter Integrated sensor Auto-ranging with peak sample-and-hold Power measurement from 0.5 µW-1W ±5% calibrated accuracy from 400-1064 nm RoHS Compliant LaserCheck™ is a small, lightweight, self-contained laser power meter that can easily be stored in a pocket or tool kit.

The instrument is micro-processor controlled with wavelength correction, auto-ranging (µW or mW displayed), power overload warning and automatic shutoff. At higher powers the embedded silicon photodiode is protected from saturation with a built-in optical attenuator.

LaserCheck laser power meter is supplied ready to use, complete with battery, integral pocket clip, storage case, CE certification and user instruction sheet.

To initiate a measurement cycle, press the Sample/Hold button to turn the LaserCheck laser power meter on, center the beam on the sensor for >2 seconds and release the button to record a measurement of the power. Repeat the cycle to make another measurement or the Coherent LaserCheck will switch off automatically after 10 seconds.

LaserCheck Laser Power Meter

Handheld Laser Power Meter (RoHS)

LaserCheck is an inexpensive, hand-held laser power meter that displays measurements on a built in LCD screen.

Hand-held laser power meter Integrated sensor Auto-ranging with peak sample-and-hold Power measurement from 0.5 µW-1W ±5% calibrated accuracy from 400-1064 nm RoHS Compliant LaserCheck™ is a small, lightweight, self-contained laser power meter that can easily be stored in a pocket or tool kit.

The instrument is micro-processor controlled with wavelength correction, auto-ranging (µW or mW displayed), power overload warning and automatic shutoff. At higher powers the embedded silicon photodiode is protected from saturation with a built-in optical attenuator.

LaserCheck laser power meter is supplied ready to use, complete with battery, integral pocket clip, storage case, CE certification and user instruction sheet.

To initiate a measurement cycle, press the Sample/Hold button to turn the LaserCheck laser power meter on, center the beam on the sensor for >2 seconds and release the button to record a measurement of the power. Repeat the cycle to make another measurement or the Coherent LaserCheck will switch off automatically after 10 seconds.

---